Quality Made in Germany since 1995

Quality Made in Germany since 1995

icon-tische

Tables

Tables

It happens surprisingly often that suitable stages are needed for new or special applications in scanning electron microscopy. We manufacture single pieces or a small series for your individual needs. Our special strength is to manufacture even unusual and difficult stages for microscopy.

Microscope table

  • The ZRT module replaces the original ZRT stage of the Zeiss microscope.
  • It allows rotation by 360°, tilting by up to 90° and linear movement by up to 30 mm.
  • In addition to the extended Z-stroke, the module differs from the original stage primarily in its larger load capacity (maximum 2.5 kg).

Datenblatt Download

Probertable with piezo drive

  • Suitable for a wide range of applications, such as failure analysis and measurement of semiconductor devices, sample positioning or micromanipulation.
  • High-precision positioning with a positioning accuracy of 10 nm at traversing speeds between 4mm/s and 1nm/s. 

Datenblatt Download

Piezo table K&W

  • The installed piezo drives enable precise traversing and positioning.
  • Motion resolution: < 10 nm
  • Speed: 4000 μm/sec. to 0.001 μm/sec.

Datenblatt Download

Piezo table

  • The XY module described in these operating instructions is suitable for positioning components or specimens.
  • Each specimen can be moved as desired in x-, and y- direction via its own cross-stage.
  • The stages are mounted on a base plate, which is placed on the specimen stage of the microscope like a large specimen.

Datenblatt Download

Microscope table

  • The ZRT module replaces the original ZRT stage of the Zeiss microscope.
  • It allows rotation by 360°, tilting by up to 90° and linear movement by up to 30 mm.
  • In addition to the extended Z-stroke, the module differs from the original stage primarily in its larger load capacity (maximum 2.5 kg).

Datenblatt Download

Probertable with piezo drive

  • Suitable for a wide range of applications, such as failure analysis and measurement of semiconductor devices, sample positioning or micromanipulation.
  • High-precision positioning with a positioning accuracy of 10 nm at traversing speeds between 4mm/s and 1nm/s. 

Datenblatt Download

Piezo table K&W

  • The installed piezo drives enable precise traversing and positioning.
  • Motion resolution: < 10 nm
  • Speed: 4000 μm/sec. to 0.001 μm/sec.

Datenblatt Download

Piezo table

  • The XY module described in these operating instructions is suitable for positioning components or specimens.
  • Each specimen can be moved as desired in x-, and y- direction via its own cross-stage.
  • The stages are mounted on a base plate, which is placed on the specimen stage of the microscope like a large specimen.

Datenblatt Download

You're now leaving our website

You’re now leaving our website. Please note that the following links open websites for whose content we are not responsible and to which our privacy policy does not apply