or as extended version -50°C to +100°C (at 3mbar)

This Peltier-Module can be mounted to the SEM stage "like a specimen". A new temperature exchanger geometry inside the module allows rapid temperature changes and precise control within a 1/10°C using the PID-controller, which is part of this package.

Quick lock water connectors allow mounting and dismounting the module within a few seconds. Changing the flange with feedthrough is not applicable. Because of its unique internal design specimen current measurements can be done during heating- or cooling experiments.

The Peltier-Module is prepared to be used with standard specimen stubs or with a clamping mechanism that holds the specimen directly onto modules surface. This Peltier-System can be used as stand-alone unit, but software integration into many SEM operating systems is available.

Specifications & Features

• temperature range -25°C to +50°C (at 3mbar with ambient at 20°C)
• extended temp. range -50°C to +100°C!
• temperature accuracy ±1°C
• display resolution 0,1°C
• temperature stability ±0,1°C
• heating / cooling rate 30°C per minute!
• specimen current measurement capability!
• PID-controller included
• interface RS 232, USB, etc.
• software integration for most SEM available
• stand-alone-capability
• quick-lock connectors
• turn-key-system (pnp)